452 N 1100 W, Centerville, UT · Serving the Wasatch Front
Free Estimates · Since 2005 Mon to Fri, 8am to 5pm (801) 347-4518
Commercial Caulking in Centerville, UT
Our Services

Commercial Caulking in Centerville, UT

Commercial Caulking · Centerville, UT

Caulked joints let a building move through Utah heat and cold while water stays out of the walls

Commercial caulking seals the joints in a building's outer walls so water stays out of the structure. Those joints run around window, storefront and door frames, and between precast or tilt-up concrete panels. Walls also carry control and expansion joints, plus coping and parapet joints along the top. Wherever a pipe, vent or louver passes through, or two materials meet, sealant closes the gap.

Complete Concrete Coatings is licensed and insured and has coated Utah concrete since 2005 from our Centerville shop. Caulking and sealants are part of our commercial property work for HOAs, apartment buildings, hotels, offices, retail and warehouse buildings. As a caulking contractor, we seal around windows, panels and building joints. Joints in floors, sidewalks, plazas, entries and parking decks are a separate line, our slab joint sealing.

What We Handle

  • Commercial window caulking at window and storefront perimeters
  • Door frame joints and joints where two different materials meet
  • Precast panel caulking on precast and tilt-up concrete walls
  • Control, expansion, coping and parapet joints in building walls
  • Pipes, vents, louvers and other penetrations sealed at the wall
  • Failed sealant cut out and joint faces cleaned, then primed where the maker calls for it
  • Closed-cell backer rod or bond-breaker tape so sealant bonds to two sides only
  • Manufacturer warranty passed on, every product applied to spec

Free Commercial Caulking Quote

Tell us about the floor, deck or slab and we will get right back to you.

Why does exterior caulking fail in Utah?

Exterior caulking in Utah rides out big temperature swings. In Salt Lake City, the average July day runs from about 68 degrees to 94. An average January night drops to about 24, nearly 70 degrees below an average July afternoon. Building materials move with those swings, so the sealant in each joint stretches and squeezes.

Sun and heat age sealant too, and highs reach 90 degrees or more on about 62 days a year. Aged sealant cracks and chalks, and a badly sized bead can pull loose or split down the middle. Lows drop to 32 degrees or colder on about 112 days a year, so water in an open joint can freeze. Bond failures often trace back to the joint design or to poor surface prep.

How does commercial caulking work?

Sealant replacement starts by cutting the failed sealant out of the joint, all of it. The joint faces get cleaned to sound, dry material, then primed where the sealant maker calls for it. Closed-cell backer rod or bond-breaker tape goes in next, so the new sealant bonds to two sides only. A bead stuck to three sides can tear loose or split as the joint moves.

The sealant goes in at the depth the manufacturer sets, often about half the joint's width. Then it is tooled flush to slightly concave, which presses it against both joint faces. Building sealants carry a movement rating, written as a percentage of the joint's width. We match the sealant to how much each joint moves and to the surfaces on both sides.

What does commercial caulking cost in Utah?

Commercial caulking is priced by the job, and length comes first: how many feet of joint the building has. Joint width and depth come next, along with how much old sealant has to come out. Access matters too, because joints high on a wall take longer to reach than joints at ground level. Commercial jobs also price the staging and the schedule when tenants stay in the building.

The first step is a free estimate at your building, where we measure the joints and check the old sealant. Then you get a written number for the system that fits each joint. Commercial work runs from Ogden south through Salt Lake County, out of our Centerville shop. Call (801) 347-4518 Monday through Friday, 8am to 5pm, and the office will set a time.

Worker in a hard hat running a sealant joint along a brick wall from a work platform Sealed vertical joints between tilt-up concrete wall panels at grade

Ready to get started?

Free, no-obligation estimates across the Wasatch Front, from our Centerville shop.

(801) 347-4518
What You Can Expect

How a Job With Complete Concrete Coatings Runs

From the first call to the cured floor, here is how it goes.

1

Call or Send the Form

Tell us what the floor, deck or slab needs. A few photos help. The office answers Monday through Friday, 8am to 5pm, and gets you on the schedule.

2

Free Estimate at the Property

We come out, measure the surface and check the concrete for cracks, moisture and old coatings. You get a written price for the system that fits.

3

Prep, Repair, Coat

We grind or sandblast the slab, repair cracks and spalling, then build the coating in layers. Most garage floors are done in 1 day. Decks take longer.

4

Cure and Walk-Through

Each layer cures before the next one. We tell you when to walk on it and when to park on it, and we go over the care and the manufacturer's warranty.

FAQ

Commercial Caulking Questions, Answered

Common questions about commercial caulking across the Wasatch Front. Don't see yours? Give us a call and ask.

Call (801) 347-4518

How can I tell building caulking needs replacing?
Look along each joint for sealant that has torn loose from one side or split open in the middle. Cracked or chalky sealant has aged in the sun and heat. A gap means the sealant is gone and water has a way in. We check the joints at the free estimate.
Can new caulking go over the old sealant?
No. The failed sealant gets cut out of the joint, all of it, before anything new goes in. Sealant makers call for clean, dry joint faces, so the new bead bonds to the building itself. Then backer rod and fresh sealant go in at the depth the manufacturer sets.
Which sealant do you use on a building?
It depends on the joint. Each sealant has a movement rating, and some bond better to certain surfaces than others. Silicone, for one, holds up well in sun, since sunlight lacks the energy to break its bonds. We pick the sealant for each joint and apply it to the manufacturer's specifications.
Can you reseal the joints between precast or tilt-up panels?
Yes. Precast and tilt-up concrete walls go up in panels, with a joint between each one. Those joints open and close as the panels move with heat and cold. Each one gets the same steps: old sealant out, clean faces, backer rod, then sealant rated for the movement.
Do you seal where a wall meets a balcony or a parking deck?
Yes, as part of the deck system. Our balcony and walkway waterproofing adds flashing where a deck meets a wall, when the deck needs it. On a parking deck, walls, curbs and columns get a bead of sealant where they meet the deck. That bead goes in with our parking deck waterproofing.
Can tenants stay in the building while you work?
Usually, yes. We stage the job in sections, so residents and tenants keep a way in and out. Property managers get the dates for each section ahead of time to post tenant notices. Phased work costs more, and we say so up front.
Is there a warranty on commercial caulking?
We pass on the manufacturer's warranty and apply every product to the manufacturer's specifications. The terms come from the sealant used on your building, and we go over them at the free estimate. How long a joint lasts also depends on the sealant, the joint design, the prep and the weather it faces.
More From Complete Concrete Coatings

Explore Our Other Services

Garage Floor Coatings in Centerville, UT

Garage Floor Coatings

A garage floor coating from Complete Concrete Coatings starts with diamond grinding and crack repair. Then comes an epoxy base with color flake, sealed under a clear polyaspartic top coat. Most Centerville area garages are finished in 1 day, with free estimates.

Metallic Epoxy in Centerville, UT

Metallic Epoxy

Metallic epoxy flooring puts metallic pigment in clear epoxy, then moves it while it is wet. The result is a marble style floor with veins and depth. We install it in garages, basements and commercial rooms across the Wasatch Front.

Basement Floors in Centerville, UT

Basement Floors

Basement floor coatings bond an epoxy system to a ground down basement slab. We moisture test the concrete first, then finish in flake, metallic or solid color under a clear top coat.

Concrete Resurfacing in Centerville, UT

Concrete Resurfacing

Concrete resurfacing repairs your existing slab, then covers it with a bonded overlay or coating system. You pick the color and texture, and a clear top coat locks it in. We resurface porches, patios, driveways, walkways and steps across the Wasatch Front.

Concrete Repair in Centerville, UT

Concrete Repair

We repair cracked, spalling and pitted concrete on driveways, garage floors, patios and shop slabs across the Wasatch Front. Damaged areas get cut back and filled, the surface gets ground flat, then a coating or sealer protects the repair.

Waterproof Decks in Centerville, UT

Waterproof Decks

Waterproof deck coatings seal plywood and concrete decks against snow, meltwater and sun. We inspect the deck, lay a rubberized membrane, add your color and finish with a sealing top coat. Slip-resistant textures available. Free estimates across the Wasatch Front.

Why Choose Complete Concrete Coatings

Why Wasatch Front Property Owners Call Us

Coating Concrete Since 2005

The company started in 2005 and is still family owned and run. The crews have ground, repaired and coated Utah garages, decks and driveways for over 20 years. That is a lot of freeze-thaw winters and salted slabs.

Prep First, Every Time

Coatings fail at the prep, so we diamond grind or sandblast every slab, fix the cracks and spalling, and test for moisture before any color goes down. Every product goes on to the manufacturer's specifications.

Repair Instead of Replace

A worn porch, a salt-damaged driveway or a stained garage floor rarely needs a tear-out. We repair the surface and coat, resurface or seal it. You keep the slab and spend the money on the surface you see.

Centerville Is Home

Our shop sits at 452 N 1100 W in Centerville, so Davis County, Salt Lake City and Ogden are short drives. Call and the office sets a time to come look at the slab. Estimates are free and happen at the property.

Google Reviews

Rated 4.8 on Google by Utah Homeowners and Businesses

Real reviews from real coating, resurfacing and deck jobs on Google.

Read All Reviews

They did a great job on the epoxy, the garage floor looks great, and the service was awesome! They got me scheduled quick, showed up exactly on time and got the work done when they said it would be done.

Aaron Sessions4 months ago · Google review

We had a spalling problem on driveway due to road salt. Work was performed on schedule and budget in a professional manner. And it looks terrific as well.

John Chalkera year ago · Google review

The guys knocked out my garage floor in 1 day! Concrete repair and high end epoxy at a fair price.

Ready to Start Your Project?

Get In Touch With Complete Concrete Coatings

A garage floor that dusts and stains, a porch that is flaking, a deck that leaks, a shop floor that needs to hold up? Call or send the form and we will come look at the surface and price the job. The estimate is free.

  • (801) 347-4518
  • 452 N 1100 W, Centerville, UT 84014
  • Monday to Friday, 8am to 5pm
  • Free estimates at the property · Since 2005

Get a Free Estimate

Tell us about the floor, deck or slab and we will get right back to you.

Call (801) 347-4518